The key component in this model is the helmet – it plays the most important role in distillation: some part of the vapour condenses on the walls of the helmet and flows down in the form of reflux condensate which boils again and then is partially cooled. This process has a huge impact on strengthening and quality of the product.
The volume of this model of the helmet is 17 liters!
Moreover, heavy impurities with high boiling point precipitate on the inner walls of the helmet and flow back into the alembic, thus they can not infiltrate the separated product.
This still from «Max Cuprum» is a guaranteed maximum protection against splashes and foam in the finished product. Using the distilling helmet, you can fill the alembic with much more liquid, and you will not be limited in the heating power supply!
This model is very easy to maintain: the condenser is tightly attached to the helmet by means of clamp connection and can be easily disconnected. Due to the wide base of the still and its movability it can be easily cleaned by hand, given that it is the helmet where the heaviest impurities are precipitated, leaving a dense oxide film. The condenser of the distiller is also collapsible, the collapsible neck can also be easily disconnected. With the helmet from "Max Cuprum" you can distil even the thickest mash! In addition, it is not only a still for whiskey: this model is suitable for any noble distillates.
The distilling column is made of pure M1 grade copper (copper content – not less than 99.9%) and food grade AISI 304 stainless steel with no impurities and coatings that mimic the copper surface! The distilling helmet is equipped with a convenient TRI-CLAMP 6" connection. All gaskets are made of food grade silicone, specially designed for contact with alcohol-containing product.
- Boiler - 1 PCs.
- Helmet 17l Tri-Clamp 6"-4" - 1 PCs.
- Elbow Tri-Clamp 2" 180° - 1 PCs.
- Elbow Tri-Clamp 2" 90° - 2 PCs.
Shell-and-tube сondenser 35 cm Tri-Clamp 2" - 1 PCs.
Surge Breaker Tri-Clamp 2" - 1 PCs.
Reducer TRI-CLAMP 2”-4” - 1 PCs.
- Clamp 2" - 6 PCs.
- Silicon Gasket Tri-Clamp 2" - 6 PCs.
- Clamp 6" - 1 PCs.
- Silicon Gasket Tri-Clamp 6" - 1PCs.
- Clamp 4" - 1 PCs.
- Silicon Gasket Tri-Clamp 1.5" - 1PCs.
- Clamp 1.5" - 1 PCs.
- Silicon Gasket Tri-Clamp 4" - 1 PCs.
1.5 Inch Stainless Ball Valve with 1.5 Inch Tri-Clamp Ends - 1 PCs.
Stainless Steel Cap TRI-CLAMP 2" - 1 PCs.
- Bimetal Thermometer - 2 PCs.
- Digital Thermometer - 1 PCs.
- PVC hose 10x1,5 mm - 5 m.
- Warranty card - 1 PCs.