Whiskey Distillation Tower With Copper Helmet 7.5 l is not only a functional distiller, it is a real work of art, made by hand by true masters of their craft.
The key component in this model is the helmet – it plays the most important role in distillation: Some part of the vapour condenses on the walls of the helmet and flows down in the form of reflux condensate which boils again and then is partially cooled. This process has a huge impact on strengthening and quality of the product.
Moreover, heavy impurities with high boiling point precipitate on the inner walls of the helmet and flow back into the alembic, thus they can not infiltrate the separated product.
This still from «Max Cuprum» is a guaranteed maximum protection against splashes and foam in the finished product. Using a distilling helmet, you can fill the alembic with much more liquid, and you will not be limited in the heating power supply!
This model is very easy to maintain: the condenser and the elbow are tightly attached to the helmet by means of TRI-CLAMP connections and can be easily dismantled. Due to the wide base of the still and its movability it can be easily cleaned by hand, given that it is the helmet where the heaviest impurities are precipitated, leaving a dense oxide film. With the helmet from "Max Cuprum" you can distil even the thickest mash! In addition, it is not only a still for whiskey: this model is suitable for any noble distillates.
Whiskey Distillation Tower With Copper Helmet 7.5 l is made completely of pure M1 grade copper (copper content – not less than 99.9%) with no impurities or coatings that mimic the copper surface! The distilling helmet is equipped with a a thermometer and a convenient food-grade stainless steel TRI-CLAMP 4" connections compatible with all alembics from "Max Cuprum" with TRI-CLAMP 4" connections. At the top of the helmet there is a built-in TRI-CLAMP 1,5" connection, thanks to which you will be able to install a dephlegmator, sight tower, cylinder shell and other components with TRI-CLAMP 1,5" connection.
Whiskey Distillation Tower With Copper Helmet 7.5 l is an exquisite and functional model from the manufacturer that allows you to get product of excellent quality. In addition, this device will be a great decoration piece. Such a beautiful thing does not need to be hidden from the eyes of guests and visitors!
- Boiler - 1 PCs.
- Helmet 7.5 l Tri-Clamp 4"-1.5" - 1 PCs.
- Elbow Tri-Clamp 1.5" 180° - 1 PCs.
Shell-and-tube сondenser 35 cm Tri-Clamp 1.5" - 1 PCs.
Surge Breaker Tri-Clamp 1.5" - 1 PCs.
- Clamp 1.5" - 3 PCs.
- Silicon Gasket Tri-Clamp 1.5" - 3 PCs.
- Clamp 4" - 1 PCs.
- Silicon Gasket Tri-Clamp 4" - 1 PCs.
- Bimetal Thermometer - 1 PCs.
- Digital Thermometer - 1 PCs.
- PVC hose 10x1,5 mm - 5 m.
- Warranty card - 1 PCs.